# EasyTier
 
 [![GitHub](https://img.shields.io/github/license/KKRainbow/EasyTier)](https://github.com/KKRainbow/EasyTier/blob/main/LICENSE)
 [![GitHub last commit](https://img.shields.io/github/last-commit/KKRainbow/EasyTier)](https://github.com/KKRainbow/EasyTier/commits/main)
 [![GitHub issues](https://img.shields.io/github/issues/KKRainbow/EasyTier)](https://github.com/KKRainbow/EasyTier/issues)
 [![GitHub actions](https://github.com/KKRainbow/EasyTier/actions/workflows/rust.yml/badge.svg)](https://github.com/KKRainbow/EasyTier/actions/)
 
[简体中文](/README_CN.md) | [English](/README.md)

 EasyTier is a simple, plug-and-play, decentralized VPN networking solution implemented with the Rust language and Tokio framework.
 
 ## Features
 
- **Decentralized**: No need to rely on centralized services, nodes are equal and independent.
- **Cross-platform**: Supports MacOS/Linux/Windows, will support IOS and Android in the future. The executable file is statically linked, making deployment simple.
- **Networking without public IP**: Supports networking using shared public nodes, refer to [Configuration Guide](#Networking-without-public-IP)
- **NAT traversal**: Supports UDP-based NAT traversal, able to establish stable connections even in complex network environments.
- **Subnet Proxy (Point-to-Network)**: Nodes can expose accessible network segments as proxies to the VPN subnet, allowing other nodes to access these subnets through the node.
- **Smart Routing**: Selects links based on traffic to reduce latency and increase throughput.
- **TCP Support**: Provides reliable data transmission through concurrent TCP links when UDP is limited, optimizing performance.
- **High Availability**: Supports multi-path and switches to healthy paths when high packet loss or network errors are detected.

 
 ## Installation
 
 1. **Download the precompiled binary file**
 
     Visit the [GitHub Release page](https://github.com/KKRainbow/EasyTier/releases) to download the binary file suitable for your operating system.
 
 2. **Install via crates.io**
    ```sh
    cargo install easytier
    ```
 
 3. **Install from source code**
    ```sh
    cargo install --git https://github.com/KKRainbow/EasyTier.git
    ```
 
 ## Quick Start
 
 Make sure EasyTier is installed according to the [Installation Guide](#Installation), and both easytier-core and easytier-cli commands are available.
 
 ### Two-node Networking
 
 Assuming the network topology of the two nodes is as follows
 
 ```mermaid
 flowchart LR
 
 subgraph Node A IP 22.1.1.1
 nodea[EasyTier\n10.144.144.1]
 end
 
 subgraph Node B
 nodeb[EasyTier\n10.144.144.2]
 end
 
 nodea <-----> nodeb
 
 ```
 
 1. Execute on Node A:
    ```sh
    sudo easytier-core --ipv4 10.144.144.1
    ```
    Successful execution of the command will print the following.
 
    ![alt text](assets/image-2.png)
 
 2. Execute on Node B
    ```sh
    sudo easytier-core --ipv4 10.144.144.2 --peers udp://22.1.1.1:11010
    ```
 
 3. Test Connectivity
 
    The two nodes should connect successfully and be able to communicate within the virtual subnet
    ```sh
    ping 10.144.144.2
    ```
 
    Use easytier-cli to view node information in the subnet
    ```sh
    easytier-cli peer
    ```
    ![alt text](assets/image.png)
    ```sh
    easytier-cli route
    ```
    ![alt text](assets/image-1.png)

---
 
 ### Multi-node Networking
 
 Based on the two-node networking example just now, if more nodes need to join the virtual network, you can use the following command.
 
 ```
 sudo easytier-core --ipv4 10.144.144.2 --peers udp://22.1.1.1:11010
 ```
 
 The `--peers` parameter can fill in the listening address of any node already in the virtual network.
 
 ---
 
 ### Subnet Proxy (Point-to-Network) Configuration
 
 Assuming the network topology is as follows, Node B wants to share its accessible subnet 10.1.1.0/24 with other nodes.
 
 ```mermaid
 flowchart LR
 
 subgraph Node A IP 22.1.1.1
 nodea[EasyTier\n10.144.144.1]
 end
 
 subgraph Node B
 nodeb[EasyTier\n10.144.144.2]
 end
 
 id1[[10.1.1.0/24]]
 
 nodea <--> nodeb <-.-> id1
 
 ```
 
 Then the startup parameters for Node B's easytier are (new -n parameter)
 
 ```sh
 sudo easytier-core --ipv4 10.144.144.2 -n 10.1.1.0/24
 ```
 
 Subnet proxy information will automatically sync to each node in the virtual network, and each node will automatically configure the corresponding route. Node A can check whether the subnet proxy is effective through the following command.
 
 1. Check whether the routing information has been synchronized, the proxy_cidrs column shows the proxied subnets.
 
    ```sh
    easytier-cli route
    ```
    ![alt text](assets/image-3.png)
 
2. Test whether Node A can access nodes under the proxied subnet
 
    ```sh
    ping 10.1.1.2
    ```
 
 ---
 
 ### Networking without Public IP
 
 EasyTier supports networking using shared public nodes. The currently deployed shared public node is ``tcp://easytier.public.kkrainbow.top:11010``.
 
 When using shared nodes, each node entering the network needs to provide the same ``--network-name`` and ``--network-secret`` parameters as the unique identifier of the network.
 
 Taking two nodes as an example, Node A executes:
 
 ```sh
 sudo easytier-core -i 10.144.144.1 --network-name abc --network-secret abc -e 'tcp://easytier.public.kkrainbow.top:11010'
 ```
 
 Node B executes
 
 ```sh
 sudo easytier-core --ipv4 10.144.144.2 --network-name abc --network-secret abc -e 'tcp://easytier.public.kkrainbow.top:11010'
 ```
 
 After the command is successfully executed, Node A can access Node B through the virtual IP 10.144.144.2.
 
 
 ### Configurations
 
 You can use ``easytier-core --help`` to view all configuration items
 
 
 # Roadmap
 
 - [ ] Improve documentation and user guides.
 - [ ] Support features such as encryption, TCP hole punching, etc.
 - [ ] Support Android, IOS and other mobile platforms.
 - [ ] Support Web configuration management.
 
 # Community and Contribution
 
 We welcome and encourage community contributions! If you want to get involved, please submit a [GitHub PR](https://github.com/KKRainbow/EasyTier/pulls). Detailed contribution guidelines can be found in [CONTRIBUTING.md](https://github.com/KKRainbow/EasyTier/blob/main/CONTRIBUTING.md).
 
 # Related Projects and Resources
 
 - [ZeroTier](https://www.zerotier.com/): A global virtual network for connecting devices.
 - [TailScale](https://tailscale.com/): A VPN solution aimed at simplifying network configuration.
 - [vpncloud](https://github.com/dswd/vpncloud): A P2P Mesh VPN
 
 # License
 
 EasyTier is released under the [Apache License 2.0](https://github.com/KKRainbow/EasyTier/blob/main/LICENSE).
 
 # Contact
 
 - Ask questions or report problems: [GitHub Issues](https://github.com/KKRainbow/EasyTier/issues)
 - Discussion and exchange: [GitHub Discussions](https://github.com/KKRainbow/EasyTier/discussions)
 - QQ Group: 949700262