#!/bin/bash
# Copyright (C) Juewuy

#导入订阅、配置文件相关
linkconfig(){
	echo -----------------------------------------------
	echo 当前使用规则为：$rule_link
	echo " 1	Acl4SSR全能优化版（推荐）"
	echo " 2	Acl4SSR精简优化版（推荐）"
	echo " 3	Acl4SSR全能优化+去广告增强"
	echo " 4	Acl4SSR极简版（适合自建节点）"
	echo " 5	Acl4SSR分流&游戏增强"
	echo " 6	Acl4SSR分流&游戏&去广告增强（低性能设备慎用）"
	echo " 7	洞主规则精简版（推荐）"
	echo " 8	洞主规则重度完整版"
	echo " 9	神机规则高级版"
	echo " 10	神机规则-回国专用"
	echo " 11	李哥规则-墙洞专用"
	echo -----------------------------------------------
	echo 0 返回上级菜单
	read -p "请输入对应数字 > " num
	if [ -z "$num" ] || [ "$num" -gt 17 ];then
		errornum
	elif [ "$num" = 0 ];then
		echo 
	elif [ "$num" -le 17 ];then
		#将对应标记值写入mark
		rule_link=$num
		setconfig rule_link $rule_link
		echo -----------------------------------------------	  
		echo -e "\033[32m设置成功！返回上级菜单\033[0m"
	fi
}
linkserver(){
	echo -----------------------------------------------
	echo -e "\033[36m以下为互联网采集的第三方服务器，具体安全性请自行斟酌！\033[0m"
	echo -e "\033[32m感谢以下作者的无私奉献！！！\033[0m"
	echo 当前使用后端为：$server_link
	echo 1 api.dler.io			（墙洞提供）
	echo 2 sub.shellclash.cf	（作者提供）
	echo 3 sub.xeton.dev		（SUB作者T大提供）
	echo 4 sub.id9.cc			（品云提供）
	echo 5 sub.maoxiongnet.com	（猫熊提供）
	echo -----------------------------------------------
	echo 0 返回上级菜单
	read -p "请输入对应数字 > " num
	if [ -z "$num" ] || [ "$num" -gt 5 ];then
		errornum
	elif [ "$num" = 0 ];then
		echo
	elif [ "$num" -le 5 ];then
		#将对应标记值写入mark
		server_link=$num
		setconfig server_link $server_link
		echo -----------------------------------------------	  
		echo -e "\033[32m设置成功！返回上级菜单\033[0m"
	fi
}
linkfilter(){
	[ -z "$exclude" ] && exclude="未设置"
	echo -----------------------------------------------
	echo -e "\033[33m当前过滤关键字：\033[47;30m$exclude\033[0m"
	echo -----------------------------------------------
	echo -e "\033[33m匹配关键字的节点会在导入时被【屏蔽】！！！\033[0m"
	echo -e "多个关键字可以用\033[30;47m | \033[0m号分隔"
	echo -e "\033[32m支持正则表达式\033[0m，空格请使用\033[30;47m + \033[0m号替代"
	echo -----------------------------------------------
	echo -e " 000   \033[31m删除\033[0m关键字"
	echo -e " 回车  取消输入并返回上级菜单"
	echo -----------------------------------------------
	read -p "请输入关键字 > " exclude
	if [ "$exclude" = '000' ]; then
		echo -----------------------------------------------
		exclude=''
		echo -e "\033[31m 已删除节点过滤关键字！！！\033[0m"
	fi
	setconfig exclude \'$exclude\'
}
linkfilter2(){
	[ -z "$include" ] && include="未设置"
	echo -----------------------------------------------
	echo -e "\033[33m当前筛选关键字：\033[47;30m$include\033[0m"
	echo -----------------------------------------------
	echo -e "\033[33m仅有匹配关键字的节点才会被【导入】！！！\033[0m"
	echo -e "多个关键字可以用\033[30;47m | \033[0m号分隔"
	echo -e "\033[32m支持正则表达式\033[0m，空格请使用\033[30;47m + \033[0m号替代"
	echo -----------------------------------------------
	echo -e " 000   \033[31m删除\033[0m关键字"
	echo -e " 回车  取消输入并返回上级菜单"
	echo -----------------------------------------------
	read -p "请输入关键字 > " include
	if [ "$include" = '000' ]; then
		echo -----------------------------------------------
		include=''
		echo -e "\033[31m 已删除节点匹配关键字！！！\033[0m"
	fi
	setconfig include \'$include\'
}
getyaml(){
	$clashdir/start.sh getyaml
	if [ "$?" = 0 ];then
		if [ "$inuserguide" != 1 ];then
			read -p "是否启动clash服务以使配置文件生效？(1/0) > " res 
			[ "$res" = 1 ] && clashstart || clashsh
			exit;
		fi
	fi
}
getlink(){
	echo -----------------------------------------------
	echo -e "\033[30;47m 欢迎使用在线生成配置文件功能！\033[0m"
	echo -----------------------------------------------
	#设置输入循环
	i=1
	while [ $i -le 99 ]
	do
		echo -----------------------------------------------
		echo -e "\033[33m本功能依赖第三方在线subconverter服务实现，脚本本身不提供任何代理服务！\033[0m"
		echo -e "\033[31m严禁使用本脚本从事任何非法活动，否则一切后果请自负！\033[0m"
		echo -----------------------------------------------
		echo -e "支持批量(<=99)导入订阅链接、分享链接"
		echo -----------------------------------------------
		echo -e " 1 \033[36m开始生成配置文件\033[0m（原文件将被备份）"
		echo -e " 2 设置\033[31m节点过滤\033[0m关键字 \033[47;30m$exclude\033[0m"
		echo -e " 3 设置\033[32m节点筛选\033[0m关键字 \033[47;30m$include\033[0m"
		echo -e " 4 选取在线\033[33m配置规则模版\033[0m"
		echo -e " 5 \033[0m选取在线生成服务器\033[0m"
		echo -e " 0 \033[31m撤销输入并返回上级菜单\033[0m"
		echo -----------------------------------------------
		read -p "请直接输入第${i}个链接或对应数字选项 > " link
		test=$(echo $link | grep "://")
		link=`echo ${link/\#*/''}`   #删除链接附带的注释内容
		link=`echo ${link/\ \(*\)/''}`   #删除恶心的超链接内容
		link=`echo ${link/*\&url\=/""}`   #将clash完整链接还原成单一链接
		link=`echo ${link/\&config\=*/""}`   #将clash完整链接还原成单一链接
		link=`echo ${link//\&/\%26}`   #将分隔符 & 替换成urlcode：%26
		if [ -n "$test" ];then
			if [ -z "$Url_link" ];then
				Url_link="$link"
			else
				Url_link="$Url_link"\|"$link"
			fi
			i=$((i+1))
				
		elif [ "$link" = '1' ]; then
			if [ -n "$Url_link" ];then
				i=100
				#将用户链接写入mark
				sed -i '/Https=*/'d $ccfg
				setconfig Url \'$Url_link\'
				Https=""
				#获取在线yaml文件
				getyaml
			else
				echo -----------------------------------------------
				echo -e "\033[31m请先输入订阅或分享链接！\033[0m"
				sleep 1
			fi
			
		elif [ "$link" = '2' ]; then
			linkfilter
			
		elif [ "$link" = '3' ]; then
			linkfilter2
			
		elif [ "$link" = '4' ]; then
			linkconfig
			
		elif [ "$link" = '5' ]; then
			linkserver
			
		elif [ "$link" = 0 ];then
			Url_link=""
			i=100
			
		else
			echo -----------------------------------------------
			echo -e "\033[31m请输入正确的链接或者数字！\033[0m"
			sleep 1
		fi
	done
} 
getlink2(){
	echo -----------------------------------------------
	echo -e "\033[32m仅限导入完整clash配置文件链接！！！\033[0m"
	echo -----------------------------------------------
	echo -e "\033[33m有流媒体需求，请使用\033[32m6-1在线生成配置文件功能！！！\033[0m"
	echo -e "\033[33m如不了解机制，请使用\033[32m6-1在线生成配置文件功能！！！\033[0m"
	echo -e "\033[33m如遇任何问题，请使用\033[32m6-1在线生成配置文件功能！！！\033[0m"
	echo -e "\033[31m此功能可能会导致部分节点无法连接或者规则覆盖不完整！！！\033[0m"
	echo -----------------------------------------------
	echo -e "\033[33m0 返回上级菜单\033[0m"
	echo -----------------------------------------------
	read -p "请输入完整链接 > " link
	test=$(echo $link | grep -iE "tp.*://" )
	link=`echo ${link/\ \(*\)/''}`   #删除恶心的超链接内容
	link=`echo ${link//\&/\%26}`   #将分隔符 & 替换成urlcode：%26
	if [ -n "$link" -a -n "$test" ];then
		echo -----------------------------------------------
		echo -e 请检查输入的链接是否正确：
		echo -e "\033[4;32m$link\033[0m"
		read -p "确认导入配置文件？原配置文件将被更名为config.yaml.bak![1/0] > " res
			if [ "$res" = '1' ]; then
				#将用户链接写入mark
				sed -i '/Url=*/'d $ccfg
				setconfig Https \'$link\'
				#获取在线yaml文件
				getyaml
			else
				getlink2
			fi
	elif [ "$link" = 0 ];then
		i=
	else
		echo -----------------------------------------------
		echo -e "\033[31m请输入正确的配置文件链接地址！！！\033[0m"
		echo -e "\033[33m仅支持http、https、ftp以及ftps链接！\033[0m"
		sleep 1
		getlink2
	fi
}
clashlink(){
	[ -z "$rule_link" ] && rule_link=1
	[ -z "$server_link" ] && server_link=1
	echo -----------------------------------------------
	echo -e "\033[30;47m 欢迎使用导入配置文件功能！\033[0m"
	echo -----------------------------------------------
	echo -e " 1 在线\033[32m生成Clash配置文件\033[0m"
	echo -e " 2 导入\033[33mClash配置文件链接\033[0m"
	echo -e " 3 \033[36m还原\033[0m配置文件"
	echo -e " 4 \033[33m更新\033[0m配置文件"
	echo -e " 5 设置\033[36m自动更新\033[0m"
	echo -----------------------------------------------
	[ "$inuserguide" = 1 ] || echo -e " 0 返回上级菜单"
	read -p "请输入对应数字 > " num
	if [ -z "$num" ];then
		errornum
	elif [ "$num" = 0 ];then
		i=
	elif [ "$num" = 1 ];then
		if [ -n "$Url" ];then
			echo -----------------------------------------------
			echo -e "\033[33m检测到已记录的链接内容：\033[0m"
			echo -e "\033[4;32m$Url\033[0m"
			echo -----------------------------------------------
			read -p "清空链接/追加导入？[1/0] > " res
			if [ "$res" = '1' ]; then
				Url_link=""
				echo -----------------------------------------------
				echo -e "\033[31m链接已清空！\033[0m"
			else
				Url_link=$Url
			fi
		fi
		getlink
	  
	elif [ "$num" = 2 ];then
		echo -----------------------------------------------
		echo -e "\033[33m此功能可能会导致严重bug，仅限熟练了解clash运行机制的用户使用！！！\033[0m"
		echo -e "如你不熟悉clash机制或者使用此功能出现bug，请使用\033[32m在线生成配置文件功能！\033[0m"
		echo -----------------------------------------------
		read -p "是否继续？[1/0] > " res
		if [ "$res" = '1' ]; then
			getlink2
		else
			echo -----------------------------------------------
			echo -e "\033[32m正在跳转……\033[0m"
			sleep 1
			getlink
		fi
		
	elif [ "$num" = 3 ];then
		yamlbak=$yaml.bak
		if [ ! -f "$yaml".bak ];then
			echo -----------------------------------------------
			echo -e "\033[31m没有找到配置文件的备份！\033[0m"
			clashlink
		else
			echo -----------------------------------------------
			echo -e 备份文件共有"\033[32m`wc -l < $yamlbak`\033[0m"行内容，当前文件共有"\033[32m`wc -l < $yaml`\033[0m"行内容
			read -p "确认还原配置文件？此操作不可逆！[1/0] > " res
			if [ "$res" = '1' ]; then
				mv $yamlbak $yaml
				echo -----------------------------------------------
				echo -e "\033[32m配置文件已还原！请手动重启clash服务！\033[0m"
				sleep 1
			else 
				echo -----------------------------------------------
				echo -e "\033[31m操作已取消！返回上级菜单！\033[0m"
				clashlink
			fi
		fi
		
	elif [ "$num" = 4 ];then
		if [ -z "$Url" -a -z "$Https" ];then
			echo -----------------------------------------------
			echo -e "\033[31m没有找到你的配置文件/订阅链接！请先输入链接！\033[0m"
			sleep 1
			clashlink
		else
			echo -----------------------------------------------
			echo -e "\033[33m当前系统记录的链接为：\033[0m"
			echo -e "\033[4;32m$Url$Https\033[0m"
			echo -----------------------------------------------
			read -p "确认更新配置文件？[1/0] > " res
			if [ "$res" = '1' ]; then
				getyaml
			else
				clashlink
			fi
		fi
		
	elif [ "$num" = 5 ];then
		clashcron
	else
		errornum
	fi
}
#下载更新相关
gettar(){
	$clashdir/start.sh webget /tmp/clashfm.tar.gz $tarurl
	[ "$?" != "0" ] && echo "文件下载失败,请尝试使用其他安装源！" && exit 1
	$clashdir/start.sh stop 2>/dev/null
	#解压
	echo -----------------------------------------------
	echo 开始解压文件！
	mkdir -p $clashdir > /dev/null
	tar -zxvf '/tmp/clashfm.tar.gz' -C $clashdir/
	[ $? -ne 0 ] && echo "文件解压失败！" && rm -rf /tmp/clashfm.tar.gz && exit 1 
	#初始化文件目录
	[ -f "$clashdir/mark" ] || echo '#标识clash运行状态的文件，不明勿动！' > $clashdir/mark
	#判断系统类型写入不同的启动文件
	if [ -f /etc/rc.common ];then
			#设为init.d方式启动
			cp -f $clashdir/clashservice /etc/init.d/clash
			chmod +x /etc/init.d/clash
	else
		[ -w /etc/systemd/system ] && sysdir=/etc/systemd/system
		[ -w /usr/lib/systemd/system ] && sysdir=/usr/lib/systemd/system
		if [ -n "$sysdir" ];then
			#设为systemd方式启动
			mv $clashdir/clash.service $sysdir/clash.service
			sed -i "s%/etc/clash%$clashdir%g" $sysdir/clash.service
			systemctl daemon-reload
		else
			#设为保守模式启动
			setconfig start_old 已开启
		fi
	fi
	#修饰文件及版本号
	shtype=sh && [ -n "$(ls -l /bin/sh|grep -oE 'dash|show|bash')" ] && shtype=bash 
	sed -i "s|/bin/sh|/bin/$shtype|" $clashdir/start.sh
	chmod +x $clashdir/start.sh
	setconfig versionsh_l $release_new
	#设置更新地址
	[ -n "$url" ] && setconfig update_url $url
	#设置环境变量	
	[ -w /opt/etc/profile ] && profile=/opt/etc/profile
	[ -w /jffs/configs/profile.add ] && profile=/jffs/configs/profile.add
	[ -w ~/.bashrc ] && profile=~/.bashrc
	[ -w /etc/profile ] && profile=/etc/profile
	if [ -n "$profile" ];then
		sed -i '/alias clash=*/'d $profile
		echo "alias clash=\"$shtype $clashdir/clash.sh\"" >> $profile #设置快捷命令环境变量
		sed -i '/export clashdir=*/'d $profile
		echo "export clashdir=\"$clashdir\"" >> $profile #设置clash路径环境变量
	else
		echo 无法写入环境变量！请检查安装权限！
		exit 1
	fi
	#华硕/Padavan额外设置
	[ -n "$initdir" ] && {
		sed -i '/ShellClash初始化/'d $initdir && touch $initdir && echo "$clashdir/start.sh init #ShellClash初始化脚本" >> $initdir
		setconfig initdir $initdir
		}
	#小米镜像化OpenWrt额外设置
	if [ "$systype" = "mi_snapshot" ];then
		chmod +x $clashdir/misnap_init.sh
		uci set firewall.ShellClash=include
		uci set firewall.ShellClash.type='script'
		uci set firewall.ShellClash.path='/data/clash/misnap_init.sh'
		uci set firewall.ShellClash.enabled='1'
		uci commit firewall
		setconfig systype $systype
	else
		rm -rf $clashdir/misnap_init.sh
		rm -rf $clashdir/clashservice
	fi
	#删除临时文件
	rm -rf /tmp/clashfm.tar.gz 
	rm -rf $clashdir/clash.service
}
getsh(){
	echo -----------------------------------------------
	echo -e "当前脚本版本为：\033[33m $versionsh_l \033[0m"
	echo -e "最新脚本版本为：\033[32m $release_new \033[0m"
	echo -e "注意更新时会停止clash服务！"
	echo -----------------------------------------------
	read -p "是否更新脚本？[1/0] > " res
	if [ "$res" = '1' ]; then
		tarurl=$update_url/bin/clashfm.tar.gz
		#下载更新
		gettar
		#提示
		echo -----------------------------------------------
		echo -e "\033[32m管理脚本更新成功!\033[0m"
		echo -----------------------------------------------
		exit;
	fi
}
getcpucore(){
	cputype=$(uname -ms | tr ' ' '_' | tr '[A-Z]' '[a-z]')
	[ -n "$(echo $cputype | grep -E "linux.*armv.*")" ] && cpucore="armv5"
	[ -n "$(echo $cputype | grep -E "linux.*armv7.*")" ] && [ -n "$(cat /proc/cpuinfo | grep vfp)" ] && [ ! -d /jffs/clash ] && cpucore="armv7"
	[ -n "$(echo $cputype | grep -E "linux.*aarch64.*|linux.*armv8.*")" ] && cpucore="armv8"
	[ -n "$(echo $cputype | grep -E "linux.*86.*")" ] && cpucore="386"
	[ -n "$(echo $cputype | grep -E "linux.*86_64.*")" ] && cpucore="amd64"
	if [ -n "$(echo $cputype | grep -E "linux.*mips.*")" ];then
		mipstype=$(echo -n I | hexdump -o 2>/dev/null | awk '{ print substr($2,6,1); exit}') #通过判断大小端判断mips或mipsle
		[ "$mipstype" = "0" ] && cpucore="mips-softfloat" || cpucore="mipsle-softfloat"
	fi
	[ -n "$cpucore" ] && setconfig cpucore $cpucore
}
setcpucore(){
	cpucore_list="armv5 armv7 armv8 386 amd64 mipsle-softfloat mipsle-hardfloat mips-softfloat"
	echo -----------------------------------------------
	echo -e "\033[31m仅适合脚本无法正确识别核心或核心无法正常运行时使用！\033[0m"
	echo -e "当前可供在线下载的处理器架构为："
	echo $cpucore_list | awk -F " " '{for(i=1;i<=NF;i++) {print i" "$i }}'
	echo -e "如果您的CPU架构未在以上列表中，请运行【uname -a】命令,并复制好返回信息"
	echo -e "之后前往 t.me/ShellClash 群提交或 github.com/juewuy/ShellClash 提交issue"
	echo -----------------------------------------------
	read -p "请输入对应数字 > " num
	setcpucore=$(echo $cpucore_list | awk '{print $"'"$num"'"}' )
	if [ -z "$setcpucore" ];then
		echo -e "\033[31m请输入正确的处理器架构！\033[0m"
		sleep 1
		cpucore=""
	else
		cpucore=$setcpucore
		setconfig cpucore $cpucore
	fi
}
getcore(){
	[ -z "$clashcore" ] && clashcore=clashpre
	[ -z "$cpucore" ] && getcpucore
	#生成链接
	corelink="$update_url/bin/$clashcore/clash-linux-$cpucore"
	#获取在线clash核心文件
	echo -----------------------------------------------
	echo 正在在线获取clash核心文件……
	$clashdir/start.sh webget /tmp/clash.new $corelink
	if [ "$?" = "1" ];then
		echo -e "\033[31m核心文件下载失败！\033[0m"
		rm -rf /tmp/clash.new
	else
		chmod +x /tmp/clash.new && /tmp/clash.new -v >/dev/null 2>&1
		if [ "$?" != 0 ];then
			echo -e "\033[31m核心文件下载失败！\033[0m"
			rm -rf /tmp/clash.new
		else
			echo -e "\033[32m$clashcore核心下载成功！\033[0m"
			mv -f /tmp/clash.new $bindir/clash
			chmod +x $bindir/clash 
			setconfig clashcore $clashcore
			setconfig clashv $version
		fi
	fi
}
setcore(){
	#获取核心及版本信息
	[ ! -f $clashdir/clash ] && clashcore="未安装核心"
	###
	echo -----------------------------------------------
	[ -z "$cpucore" ] && getcpucore
	echo -e "当前clash核心：\033[47;30m $clashcore \033[46;30m$clashv\033[0m"
	echo -e "当前系统处理器架构：\033[32m $cpucore \033[0m"
	echo -e "\033[33m请选择需要使用的核心版本！\033[0m"
	echo -----------------------------------------------
	echo "1 clash：     稳定，内存占用小，推荐！"
	echo "(官方正式版)  不支持Tun模式、混合模式"
	echo
	echo "2 clashpre：  支持Tun模式、混合模式"
	echo "(高级预览版)  内存占用更高"
	echo
	echo "3 clash.net： 支持部分vless协议"
	echo "(.net定制版)  第三方定制内核"
	echo
	echo "4 clash.meta：支持大部分vless协议"
	echo "(meta定制版)  第三方定制内核"
	echo
	echo "5 手动指定处理器架构"
	echo -----------------------------------------------
	echo 0 返回上级菜单 
	read -p "请输入对应数字 > " num
		if [ -z "$num" ]; then
			errornum
		elif [ "$num" = 0 ]; then
			i=
		elif [ "$num" = 1 ]; then
			clashcore=clash
			version=$clash_v
			getcore
		elif [ "$num" = 2 ]; then
			clashcore=clashpre
			version=$clashpre_v
			getcore
		elif [ "$num" = 3 ]; then
			clashcore=clash.net
			version=$clashnet_v
			getcore
		elif [ "$num" = 4 ]; then
			clashcore=clash.meta
			version=$meta_v
			getcore
		elif [ "$num" = 5 ]; then
			setcpucore
			setcore
		else
			errornum
			update
		fi
}
getgeo(){
	echo -----------------------------------------------
	echo 正在从服务器获取数据库文件…………
	$clashdir/start.sh webget /tmp/$geoname $update_url/bin/$geotype
	if [ "$?" = "1" ];then
		echo -----------------------------------------------
		echo -e "\033[31m文件下载失败！\033[0m"
		exit 1
	else
		mv -f /tmp/$geoname $bindir/$geoname
		echo -----------------------------------------------
		echo -e "\033[32mGeoIP/CN_IP数据库文件下载成功！\033[0m"
		Geo_v=$GeoIP_v
		setconfig Geo_v $GeoIP_v
		if [ "$geoname" = "Country.mmdb" ];then
			geotype=$geotype
			setconfig geotype $geotype
		fi
	fi
}
setgeo(){
	echo -----------------------------------------------
	[ "$geotype" = "cn_mini.mmdb" ] && echo -e "当前使用的是\033[47;30m精简版数据库\033[0m" || echo -e "当前使用的是\033[47;30m全球版数据库\033[0m"
	echo -e "\033[36m请选择需要更新/切换的GeoIP/CN_IP数据库：\033[0m"
	echo -----------------------------------------------
	echo -e " 1 由\033[32malecthw\033[0m提供的全球版GeoIP数据库(约6mb)"
	echo -e " 2 由\033[32mHackl0us\033[0m提供的精简版CN-IP数据库(约0.2mb)"
	echo -e " 3 由\033[32m17mon\033[0m提供的CN-IP文件(需启用CN_IP绕过内核功能，约0.2mb)"
	[ "$clashcore" = "clash.meta" ] && \
	echo -e " 4 由\033[32mLoyalsoldier\033[0m提供的GeoSite数据库(限Meta内核，约4.5mb)"
	echo " 0 返回上级菜单"
	echo -----------------------------------------------
	read -p "请输入对应数字 > " num
	if [ "$num" = '1' ]; then
		geotype=Country.mmdb
		geoname=Country.mmdb
		getgeo
	elif [ "$num" = '2' ]; then
		geotype=cn_mini.mmdb
		geoname=Country.mmdb
		getgeo
	elif [ "$num" = '3' ]; then
		if [ "$cn_ip_route" = "已开启" ]; then
			geotype=china_ip_list.txt
			geoname=cn_ip.txt
			getgeo
		else
			echo -----------------------------------------------
			echo -e "\033[31m未开启绕过内核功能，无需更新CN-IP文件！！\033[0m"	
			sleep 1
		fi
	elif [ "$num" = '4' ]; then
		geotype=geosite.dat
		geoname=geosite.dat
		getgeo
	else
		update
	fi
}
getdb(){
	#下载及安装
	if [ -d /www/clash -o -d $clashdir/ui ];then
		echo -----------------------------------------------
		echo -e "\033[31m检测到您已经安装过本地面板了！\033[0m"
		echo -----------------------------------------------
		read -p "是否覆盖安装？[1/0] > " res
		if [ "$res" = 1 ]; then
			rm -rf /www/clash
			rm -rf $clashdir/ui
			rm -rf $bindir/ui
		fi
	fi
	dblink="${update_url}/bin/${db_type}.tar.gz"
	echo -----------------------------------------------
	echo 正在连接服务器获取安装文件…………
	$clashdir/start.sh webget /tmp/clashdb.tar.gz $dblink
	if [ "$?" = "1" ];then
		echo -----------------------------------------------
		echo -e "\033[31m文件下载失败！\033[0m"
		echo -----------------------------------------------
		setdb
	else
		echo -e "\033[33m下载成功，正在解压文件！\033[0m"
		mkdir -p $dbdir > /dev/null
		tar -zxvf "/tmp/clashdb.tar.gz" -C $dbdir > /dev/null
		if [ $? -ne 0 ];then
			tar -zxvf "/tmp/clashdb.tar.gz" --no-same-permissions -C $dbdir > /dev/null
			[ $? -ne 0 ] && echo "文件解压失败！" && rm -rf /tmp/clashfm.tar.gz && exit 1 
		fi
		#修改默认host和端口
		if [ "$db_type" = "clashdb" -o "$db_type" = "meta_db" ];then
			sed -i "s/127.0.0.1/${host}/g" $dbdir/assets/*.js
			sed -i "s/9090/${db_port}/g" $dbdir/assets/*.js
		else
			sed -i "s/127.0.0.1:9090/${host}:${db_port}/g" $dbdir/*.html
			#sed -i "s/7892/${db_port}/g" $dbdir/app*.js
		fi
		#写入配置文件
		setconfig hostdir \'$hostdir\'
		echo -----------------------------------------------
		echo -e "\033[32m面板安装成功！\033[0m"
		rm -rf /tmp/clashdb.tar.gz
		sleep 1
	fi
}
setdb(){
	dbdir(){
		if [ -w /www -a -n "$(pidof nginx)" ];then
			echo -----------------------------------------------
			echo -e "请选择面板\033[33m安装目录：\033[0m"
			echo -----------------------------------------------
			echo -e " 1 在$clashdir/ui目录安装"
			echo -e " 2 在/www/clash目录安装"
			echo -----------------------------------------------
			echo " 0 返回上级菜单"
			read -p "请输入对应数字 > " num

			if [ "$num" = '1' ]; then
				dbdir=$clashdir/ui
				hostdir=":$db_port/ui"
			elif [ "$num" = '2' ]; then
				dbdir=/www/clash
				hostdir='/clash'
			else
				setdb
			fi
		else
				dbdir=$clashdir/ui
				hostdir=":$db_port/ui"
		fi
	}

	echo -----------------------------------------------
	echo -e "\033[36m安装本地版dashboard管理面板\033[0m"
	echo -e "\033[32m打开管理面板的速度更快且更稳定\033[0m"
	echo -----------------------------------------------
	echo -e "请选择面板\033[33m安装类型：\033[0m"
	echo -----------------------------------------------
	echo -e " 1 安装\033[32m官方面板\033[0m(约500kb)"
	echo -e " 2 安装\033[32mMeta面板\033[0m(约800kb)"
	echo -e " 3 安装\033[32mYacd面板\033[0m(约1.1mb)"
	echo -e " 4 安装\033[32mYacd-Meta魔改面板\033[0m(约1.5mb)"
	echo -e " 5 卸载\033[33m本地面板\033[0m"
	echo " 0 返回上级菜单"
	read -p "请输入对应数字 > " num

	if [ "$num" = '1' ]; then
		db_type=clashdb
		dbdir
		getdb
	elif [ "$num" = '2' ]; then
		db_type=meta_db
		dbdir
		getdb
	elif [ "$num" = '3' ]; then
		db_type=yacd
		dbdir
		getdb
	elif [ "$num" = '4' ]; then
		db_type=meta_yacd
		dbdir
		getdb
	elif [ "$num" = '5' ]; then
		read -p "确认卸载本地面板？(1/0) > " res
		if [ "$res" = 1 ];then
			rm -rf /www/clash
			rm -rf $clashdir/ui
			rm -rf $bindir/ui
			echo -----------------------------------------------
			echo -e "\033[31m面板已经卸载！\033[0m"
			sleep 1
		fi
	else
		errornum
	fi
}
getcrt(){
	crtlink="${update_url}/bin/ca-certificates.crt"
	echo -----------------------------------------------
	echo 正在连接服务器获取安装文件…………
	$clashdir/start.sh webget /tmp/ca-certificates.crt $crtlink
	if [ "$?" = "1" ];then
		echo -----------------------------------------------
		echo -e "\033[31m文件下载失败！\033[0m"
	else
		echo -----------------------------------------------
		mv -f /tmp/ca-certificates.crt $crtdir
		$clashdir/start.sh webget /tmp/ssl_test https://baidu.com echooff rediron skipceroff
		if [ "$?" = "1" ];then
			export CURL_CA_BUNDLE=$crtdir
			echo "export CURL_CA_BUNDLE=$crtdir" >> /etc/profile
		fi
		rm -rf /tmp/ssl_test
		echo -e "\033[32m证书安装成功！\033[0m"
		sleep 1
	fi
}
setcrt(){
	openssldir=$(openssl version -a 2>&1 | grep OPENSSLDIR | awk -F "\"" '{print $2}')
	[ -z "$openssldir" ] && openssldir=/etc/ssl
	if [ -n "$openssldir" ];then
		crtdir="$openssldir/certs/ca-certificates.crt"
		echo -----------------------------------------------
		echo -e "\033[36m安装/更新本地根证书文件(ca-certificates.crt)\033[0m"
		echo -e "\033[33m用于解决证书校验错误，x509报错等问题\033[0m"
		echo -e "\033[31m无上述问题的设备请勿使用！\033[0m"
		echo -----------------------------------------------
		[ -f "$crtdir" ] && echo -e "\033[33m检测到系统已经安装根证书文件了！\033[0m\n-----------------------------------------------"
		read -p "确认安装？(1/0) > " res

		if [ -z "$res" ];then
			errornum
		elif [ "$res" = '0' ]; then
			i=
		elif [ "$res" = '1' ]; then
			getcrt
		else
			errornum
		fi
	else
		echo -----------------------------------------------
		echo -e "\033[33m设备可能尚未安装openssl，无法安装证书文件！\033[0m"
		sleep 1
	fi
}
setserver(){
	saveserver(){
		#写入mark文件
		setconfig update_url \'$update_url\'
		setconfig release_url \'$release_url\'
		echo -----------------------------------------------
		echo -e "\033[32m源地址更新成功！\033[0m"
		release_new=""
	}
	echo -----------------------------------------------
	echo -e "\033[30;47m切换ShellClash版本及更新源地址\033[0m"
	echo -e "当前源地址：\033[4;32m$update_url\033[0m"
	echo -----------------------------------------------
	echo -e " 1 \033[32m正式版\033[0m&Jsdelivr-CDN源"
	echo -e " 2 \033[32m正式版\033[0m&fastgit.org源"
	echo -e " 3 \033[36m公测版\033[0m&Github源(本机clash服务加速)"
	echo -e " 4 \033[36m公测版\033[0m&ShellClash源"
	echo -e " 5 \033[36m公测版\033[0m&githubusercontents加速"
	echo -e " 6 \033[36m公测版\033[0m&fastgit.org源"
	echo -e " 7 \033[33m内测版\033[0m(请加TG讨论组:\033[4;36mhttps://t.me/ShellClash\033[0m)"
	echo -e " 8 自定义源地址(用于本地源或自建源)"
	echo -e " 9 \033[31m版本回退\033[0m"
	echo -e " 0 返回上级菜单"
	read -p "请输入对应数字 > " num
	if	[ -z "$num" ]; then 
		errornum
	elif [ "$num" = 1 ]; then
		release_url='https://fastly.jsdelivr.net/gh/juewuy/ShellClash'
		saveserver
	elif [ "$num" = 2 ]; then
		release_url='https://raw.fastgit.org/juewuy/ShellClash'
		saveserver
	elif [ "$num" = 3 ]; then
		update_url='https://raw.githubusercontent.com/juewuy/ShellClash/master'
		release_url=''
		saveserver
	elif [ "$num" = 4 ]; then
		update_url='https://gh.shellclash.cf/master'
		release_url=''
		saveserver
	elif [ "$num" = 5 ]; then
		update_url='https://raw.githubusercontents.com/juewuy/ShellClash/master'
		release_url=''
		saveserver
	elif [ "$num" = 6 ]; then
		update_url='https://raw.fastgit.org/juewuy/ShellClash/master'
		release_url=''
		saveserver
	elif [ "$num" = 7 ]; then
		update_url='http://test.shellclash.cf'
		release_url=''
		saveserver
	elif [ "$num" = 8 ]; then
		echo -----------------------------------------------
		read -p "请输入个人源路径 > " update_url
		if [ -z "$update_url" ];then
			echo -----------------------------------------------
			echo -e "\033[31m取消输入，返回上级菜单\033[0m"
		else
			saveserver
			release_url=''
		fi
	elif [ "$num" = 9 ]; then
		echo -----------------------------------------------
		$clashdir/start.sh webget /tmp/clashrelease https://raw.githubusercontents.com/juewuy/ShellClash/master/bin/release_version echooff rediroff 2>/tmp/clashrelease
		echo -e "\033[31m请选择想要回退至的release版本：\033[0m"
		cat /tmp/clashrelease | awk '{print " "NR" "$1}'
		echo -e " 0 返回上级菜单"
		read -p "请输入对应数字 > " num
		if [ -z "$num" -o "$num" = 0 ]; then
			setserver
		elif [ $num -le $(cat /tmp/clashrelease | awk 'END{print NR}') 2>/dev/null ]; then
			release_version=$(cat /tmp/clashrelease | awk '{print $1}' | sed -n "$num"p)
			update_url="https://raw.githubusercontents.com/juewuy/ShellClash/$release_version"
			saveserver
			release_url=''
		else
			echo -----------------------------------------------
			echo -e "\033[31m输入有误，请重新输入！\033[0m"
		fi
	else
		errornum
	fi
}
checkupdate(){
if [ -z "$release_new" ];then
	if [ -n "$release_url" ];then
		[ -n "$(echo $release_url|grep 'jsdelivr')" ] && check_url=$release_url@master || check_url=$release_url/master
		$clashdir/start.sh webget /tmp/clashversion $check_url/bin/release_version echoon rediroff 2>/tmp/clashversion
		release_new=$(cat /tmp/clashversion | head -1)
		[ -n "$(echo $release_url|grep 'jsdelivr')" ] && update_url=$release_url@$release_new || update_url=$release_url/$release_new
		setconfig update_url \'$update_url\'
		release_type=正式版
	else
		release_type=测试版
	fi	
	$clashdir/start.sh webget /tmp/clashversion $update_url/bin/version echooff 
	[ "$?" = "0" ] && release_new=$(cat /tmp/clashversion | grep -oE 'versionsh=.*' | awk -F'=' '{ print $2 }')
	[ -n "$release_new" ] && source /tmp/clashversion 2>/dev/null || echo -e "\033[31m检查更新失败！请检查网络连接或切换安装源！\033[0m"
	rm -rf /tmp/clashversion
fi
}
update(){
	echo -----------------------------------------------
	echo -ne "\033[32m正在检查更新！\033[0m\r"
	checkupdate
	[ "$clashcore" = "clash" ] && clash_n=$clash_v || clash_n=$clashpre_v
	[ "$clashcore" = "clashpre" ] && clash_n=$clashpre_v
	[ "$clashcore" = "clash.net" ] && clash_n=$clashnet_v
	[ "$clashcore" = "clash.meta" ] && clash_n=$meta_v
	clash_v=$($bindir/clash -v 2>/dev/null | sed 's/ linux.*//;s/.* //')
	[ -z "$clash_v" ] && clash_v=$clashv
	echo -e "\033[30;47m欢迎使用更新功能：\033[0m"
	echo -----------------------------------------------
	echo -e " 1 更新\033[36m管理脚本  	\033[33m$versionsh_l\033[0m > \033[32m$versionsh$release_type\033[0m"
	echo -e " 2 切换\033[33mclash核心 	\033[33m$clash_v\033[0m > \033[32m$clash_n\033[0m"
	echo -e " 3 更新\033[32mGeoIP/CN-IP	\033[33m$Geo_v\033[0m > \033[32m$GeoIP_v\033[0m"
	echo -e " 4 安装本地\033[35mDashboard\033[0m面板"
	echo -e " 5 安装/更新本地\033[33m根证书文件\033[0m"
	echo -e " 6 查看\033[32mPAC\033[0m自动代理配置"
	echo -----------------------------------------------
	echo -e " 7 切换\033[36m安装源\033[0m及\033[36m安装版本\033[0m"
	echo -e " 8 鸣谢"
	echo -e " 9 \033[31m卸载\033[34mShellClash\033[0m"
	echo -e " 0 返回上级菜单" 
	echo -----------------------------------------------
	read -p "请输入对应数字 > " num
	if [ -z "$num" ]; then
		errornum
	elif [ "$num" = 0 ]; then
		i=
	elif [ "$num" = 1 ]; then	
		getsh	

	elif [ "$num" = 2 ]; then	
		setcore
		update
		
	elif [ "$num" = 3 ]; then	
		setgeo
		update
	
	elif [ "$num" = 4 ]; then	
		setdb
		update
		
	elif [ "$num" = 5 ]; then	
		setcrt
		update	
		
	elif [ "$num" = 6 ]; then	
		echo -----------------------------------------------
		echo -e "PAC配置链接为：\033[30;47m http://$host:$db_port/ui/pac \033[0m"
		echo -e "PAC的使用教程请参考：\033[4;32mhttps://juewuy.github.io/ehRUeewcv\033[0m"
		sleep 2
		update
		
	elif [ "$num" = 7 ]; then	
		setserver
		update
		
	elif [ "$num" = 8 ]; then		
		echo -----------------------------------------------
		echo -e "感谢：\033[32mClash \033[0m作者\033[36m Dreamacro\033[0m 项目地址：\033[32mhttps://github.com/Dreamacro/clash\033[0m"
		echo -e "感谢：\033[32msubconverter \033[0m作者\033[36m tindy2013\033[0m 项目地址：\033[32mhttps://github.com/tindy2013/subconverter\033[0m"
		echo -e "感谢：\033[32malecthw提供的GeoIP数据库\033[0m 项目地址：\033[32mhttps://github.com/alecthw/mmdb_china_ip_list\033[0m"
		echo -e "感谢：\033[32mHackl0us提供的GeoIP精简数据库\033[0m 项目地址：\033[32mhttps://github.com/Hackl0us/GeoIP2-CN\033[0m"
		echo -e "感谢：\033[32m17mon提供的CN-IP列表\033[0m 项目地址：\033[32mhttps://github.com/17mon/china_ip_list\033[0m"
		echo -e "感谢：\033[32myacd \033[0m作者\033[36m haishanh\033[0m 项目地址：\033[32mhttps://github.com/haishanh/yacd\033[0m"
		echo -e "感谢：\033[32m更多的帮助过我的人！\033[0m"
		sleep 2
		update
		
	elif [ "$num" = 9 ]; then
		$0 -u
		update
	else
		errornum
	fi
}
#新手引导
userguide(){
	whichmod(){	
		echo -----------------------------------------------
		echo -e "\033[33m是否需要代理UDP流量(主要用于连接外服游戏)？ \033[0m"
		echo -----------------------------------------------
		echo -e " 1 \033[33m不代理UDP流量(推荐)\033[0m"
		ip tuntap >/dev/null 2>&1 && [ "$?" = 0 ] && \
		echo -e " 2 \033[32m使用Tun虚拟网卡\033[0m代理UDP流量" || \
		echo -e " - \033[0m使用Tun模式(你的设备不支持此模式，如为虚拟机运行请调整虚拟网卡设置)\033[0m"
		[ -n "$(iptables -j TPROXY 2>&1 | grep 'on-port')" ] && \
		echo -e " 3 \033[32m使用Tproxy模式\033[0m代理UDP流量"
		echo -----------------------------------------------
		read -p "请输入对应数字 > " num
		if [ -z "$num" ] || [ "$num" -gt 4 ];then
			errornum
			whichmod
		elif [ "$num" = 1 ];then
			setconfig redir_mod "Redir模式"
			setconfig clashcore "clash"
		elif [ "$num" = 2 ];then
			setconfig redir_mod "混合模式"
			setconfig clashcore "clashpre"
		elif [ "$num" = 3 ];then
			setconfig redir_mod "Redir模式"
			setconfig clashcore "clash"
			setconfig tproxy_mod "已开启"
		fi		
	}
	forwhat(){
		echo -----------------------------------------------
		echo -e "\033[30;46m 欢迎使用ShellClash新手引导！ \033[0m"
		echo -----------------------------------------------
		echo -e "\033[33m请先选择你的使用环境： \033[0m"
		echo -e "\033[0m(你之后依然可以在设置中更改各种配置)\033[0m"
		echo -----------------------------------------------
		echo -e " 1 \033[32m路由设备配置局域网透明代理\033[0m"
		echo -e " 2 \033[36mLinux设备仅配置本机代理\033[0m"
		[ -f "$ccfg.bak" ] && echo -e " 3 \033[33m还原之前备份的设置\033[0m"
		echo -----------------------------------------------
		read -p "请输入对应数字 > " num
		if [ -z "$num" ] || [ "$num" -gt 4 ];then
			errornum
			forwhat
		elif [ "$num" = 1 ];then
			whichmod
			#检测IP转发
			if [ "$(cat /proc/sys/net/ipv4/ip_forward)" = "0" ];then
				echo -----------------------------------------------
				echo -e "\033[33m检测到你的设备尚未开启ip转发，局域网设备将无法正常连接网络，是否立即开启？\033[0m"
				read -p "是否开启？(1/0) > " res
				[ "$res" = 1 ] && echo 'net.ipv4.ip_forward = 1' >> /etc/sysctl.conf
				[ "$?" = 0 ] && /etc/init.d/procps restart && echo "已成功开启ipv4转发，如未正常开启，请手动重启设备！" || echo "开启失败！请自行谷歌查找当前设备的开启方法！"
			fi
		elif [ "$num" = 2 ];then
			setconfig redir_mod "纯净模式"
			setconfig clashcore "clash"
			echo -----------------------------------------------
			echo -e "\033[36m请选择设置本机代理的方式\033[0m"
			echo -e " 1 使用\033[32m环境变量\033[0m方式配置(不支持部分应用)"
			echo -e " 2 使用\033[32miptables增强模式\033[0m配置(不支持OpenWrt)"
			echo -e " 0 稍后设置"
			read -p "请输入对应数字 > " num
			if [ "$num" = 1 ]; then
				local_proxy=已开启
				local_type=环境变量
			elif [ "$num" = 2 ]; then
				local_proxy=已开启
				local_type=iptables增强模式
			fi
			setconfig local_proxy $local_proxy
			setconfig local_type $local_type
		elif [ "$num" = 3 ];then
			mv -f $ccfg.bak $ccfg
			echo -e "\033[32m脚本设置已还原！\033[0m"
			echo -e "\033[33m请重新启动脚本！\033[0m"
			exit 0
		fi
	}
	forwhat
	#检测小内存模式
	dir_size=$(df $clashdir | awk '{print $4}' | sed 1d)
	if [ "$dir_size" -lt 10240 ];then
		echo -----------------------------------------------
		echo -e "\033[33m检测到你的安装目录空间不足10M，是否开启小闪存模式？\033[0m"
		echo -e "\033[0m开启后核心及数据库文件将被下载到内存中，这将占用一部分内存空间\033[0m"
		echo -e "\033[0m每次开机后首次运行clash时都会自动的重新下载相关文件\033[0m"
		echo -----------------------------------------------
		read -p "是否开启？(1/0) > " res
		[ "$res" = 1 ] && setconfig bindir "/tmp/clash_$USER"
	fi
	#下载本地面板
	echo -----------------------------------------------
	echo -e "\033[33m安装本地Dashboard面板，可以更快捷的管理clash内置规则！\033[0m"
	echo -----------------------------------------------
	read -p "需要安装本地Dashboard面板吗？(1/0) > " res
	[ "$res" = 1 ] && checkupdate && setdb
	#检测及下载根证书
	if [ -d /etc/ssl/certs -a ! -f '/etc/ssl/certs/ca-certificates.crt' ];then
		echo -----------------------------------------------
		echo -e "\033[33m当前设备未找到根证书文件\033[0m"
		echo -----------------------------------------------
		read -p "是否下载并安装根证书？(1/0) > " res
		[ "$res" = 1 ] && checkupdate && getcrt
	fi
	#设置加密DNS
	$clashdir/start.sh webget /tmp/ssl_test https://doh.pub echooff rediron skipceroff
	if [ "$?" = "0" ];then
		dns_nameserver='https://223.5.5.5/dns-query, https://doh.pub/dns-query, tls://dns.rubyfish.cn:853'
		dns_fallback='https://1.0.0.1/dns-query, https://8.8.4.4/dns-query, https://doh.opendns.com/dns-query'
		setconfig dns_nameserver \'"$dns_nameserver"\'
		setconfig dns_fallback \'"$dns_fallback"\' 
	fi
	rm -rf /tmp/ssl_test
	#开启公网访问
	sethost(){
		read -p "请输入你的公网IP地址 > " host
		echo $host | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}'
		if [ -z "$host" ];then
			echo -e "\033[31m请输入正确的IP地址！\033[0m"
			sethost
		fi
	}
	if type systemd >/dev/null 2>&1 ;then
		echo -----------------------------------------------
		echo -e "\033[32m是否开启公网访问Dashboard面板及socks服务？\033[0m"
		echo -e "注意当前设备必须有公网IP才能从公网正常访问"
		echo -e "\033[31m此功能会增加暴露风险请谨慎使用！\033[0m"
		echo -e "vps设备可能还需要额外在服务商后台开启相关端口"
		read -p "现在开启？(1/0) > " res
		if [ "$res" = 1 ];then
			read -p "请先设置面板访问秘钥 > " secret
			read -p "请先修改Socks服务端口(1-65535) > " mix_port
			read -p "请先设置Socks服务密码(账号默认为clash) > " sec
			[ -z "$sec" ] && authentication=clash:$sec
			host=$(curl ip.sb  2>/dev/null | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}')
			if [ -z "$host" ];then
				sethost
			fi	
			public_support=已开启
			setconfig secret $secret
			setconfig mix_port $mix_port
			setconfig host $host
			setconfig public_support $public_support
			setconfig authentication \'$authentication\'
		fi
	fi
	#提示导入订阅或者配置文件
	echo -----------------------------------------------
	echo -e "\033[32m是否导入配置文件？\033[0m(这是运行前的最后一步)"
	echo -e "\033[0m你必须拥有一份yaml格式的配置文件才能运行clash服务！\033[0m"
	echo -----------------------------------------------
	read -p "现在开始导入？(1/0) > " res
	[ "$res" = 1 ] && inuserguide=1 && clashlink && inuserguide=""
	#回到主界面
	echo -----------------------------------------------
	echo -e "\033[36m很好！现在只需要执行启动就可以愉快的使用了！\033[0m"
	echo -----------------------------------------------
	read -p "立即启动clash服务？(1/0) > " res 
	[ "$res" = 1 ] && clashstart && sleep 2
	clashsh
}
#测试菜单
testcommand(){
	echo -----------------------------------------------
	echo -e "\033[30;47m这里是测试命令菜单\033[0m"
	echo -e "\033[33m如遇问题尽量运行相应命令后截图发群\033[0m"
	echo -----------------------------------------------
	echo " 1 查看Clash运行时的报错信息(会停止clash服务)"
	echo " 2 查看系统DNS端口(:53)占用 "
	echo " 3 测试ssl加密(aes-128-gcm)跑分"
	echo " 4 查看clash相关路由规则"
	echo " 5 查看config.yaml前40行"
	echo " 6 测试代理服务器连通性（google.tw)"
	echo " 7 重新进入新手引导"
	echo " 9 查看后台脚本运行日志"
	echo -----------------------------------------------
	echo " 0 返回上级目录！"
	read -p "请输入对应数字 > " num
	if [ -z "$num" ]; then
		errornum
		clashsh
	elif [ "$num" = 0 ]; then
		clashsh
	elif [ "$num" = 1 ]; then
		$clashdir/start.sh stop
		echo -----------------------------------------------
		[ -x $clashdir/clash ] && $clashdir/clash -t -d $clashdir	
		[ "$?" = 0 ] && testover=32m测试通过！|| testover=31m出现错误！请截图后到TG群询问！！！
		echo -e "\033[$testover\033[0m"
		exit;
	elif [ "$num" = 2 ]; then
		echo -----------------------------------------------
		netstat -ntulp |grep 53
		echo -----------------------------------------------
		echo -e "可以使用\033[44m netstat -ntulp |grep xxx \033[0m来查询任意(xxx)端口"
		exit;
	elif [ "$num" = 3 ]; then
		echo -----------------------------------------------
		openssl speed -multi 4 -evp aes-128-gcm
		echo -----------------------------------------------
		exit;
	elif [ "$num" = 4 ]; then

		if [ -n "$(echo $redir_mod | grep 'Nft')" ];then
			nft list table shellclash
		else
			echo -------------------Redir---------------------
			iptables  -t nat  -L PREROUTING --line-numbers
			iptables  -t nat -L clash_dns --line-numbers
			iptables  -t nat  -L clash --line-numbers
			[ -n "$(echo $redir_mod | grep 'Tproxy')" ] && {
				echo -------------------Tproxy--------------------
				iptables  -t mangle -L PREROUTING --line-numbers
				iptables  -t mangle  -L clash --line-numbers
			}
			[ -n "$(ip6tables -t nat -L 2>&1 | grep -o 'Chain')" -a "$ipv6_support" = "已开启" ] && {
				echo -------------------Redir---------------------
				ip6tables  -t nat  -L PREROUTING --line-numbers
				ip6tables  -t nat -L clashv6_dns --line-numbers
				ip6tables  -t nat  -L clashv6 --line-numbers
				[ -n "$(echo $redir_mod | grep 'Tproxy')" ] && {
					echo -------------------Tproxy--------------------
					ip6tables  -t mangle -L PREROUTING --line-numbers
					ip6tables  -t mangle  -L clashv6 --line-numbers
				}
			}
		fi
		exit;
	elif [ "$num" = 5 ]; then
		echo -----------------------------------------------
		sed -n '1,40p' $yaml
		echo -----------------------------------------------
		exit;
	elif [ "$num" = 6 ]; then
		echo "注意：依赖curl(不支持wget)，且测试结果不保证一定准确！"
		delay=`curl -kx ${authentication}@127.0.0.1:$mix_port -o /dev/null -s -w '%{time_starttransfer}' 'https://google.tw' & { sleep 3 ; kill $! & }` > /dev/null 2>&1
		delay=`echo |awk "{print $delay*1000}"` > /dev/null 2>&1
		echo -----------------------------------------------
		if [ `echo ${#delay}` -gt 1 ];then
			echo -e "\033[32m连接成功！响应时间为："$delay" ms\033[0m"
		else
			echo -e "\033[31m连接超时！请重试或检查节点配置！\033[0m"
		fi
		clashsh
	elif [ "$num" = 7 ]; then
		userguide
	elif [ "$num" = 9 ]; then
		echo -----------------------------------------------
		cat $clashdir/log
		exit;
	else
		errornum
		clashsh
	fi
}