Austin/ShellCrash
1
0
Fork 0
mirror of https://github.com/juewuy/ShellCrash.git synced 2024-11-16 19:55:57 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
0d65f13af9
ShellCrash/scripts/clash.sh
juewuy 0d65f13af9 v1.0.0beta15.5 
~Redir模式增加基于tproxy的udp代理
~修复各种更新检测失败的bug
~增加自动生成pac逻辑
2020-10-25 13:48:22 +08:00

1007 lines
35 KiB
Bash
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#!/bin/sh
# Copyright (C) Juewuy
getconfig(){
#服务器缺省地址
[ -z "$update_url" ] && update_url=https://cdn.jsdelivr.net/gh/juewuy/ShellClash
#文件路径
[ -z "$clashdir" ] && echo 环境变量配置有误！请重新安装脚本！
ccfg=$clashdir/mark
yaml=$clashdir/config.yaml
#检查/读取标识文件
[ ! -f $ccfg ] && echo '#标识clash运行状态的文件，不明勿动！' > $ccfg
source $ccfg
#设置默认端口
[ -z "$mix_port" ] && mix_port=7890
[ -z "$redir_port" ] && redir_port=7892
[ -z "$db_port" ] && db_port=9999
[ -z "$dns_port" ] && dns_port=1053
#检查mac地址记录
[ ! -f $clashdir/mac ] && touch $clashdir/mac
#获取本机host地址
if [ -f /bin/opkg ];then
host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
else
host=$(ip a|grep -w 'inet'|grep 'global'|grep -E '192.|10.'|sed 's/.*inet.//g'|sed 's/\/[0-9][0-9].*$//g'|head -n 1)
[ -z "$host" ] && host=127.0.0.1
fi
#dashboard目录位置
[ -d /www/clash ] && dbdir=/www/clash && hostdir=/clash
[ -d $clashdir/ui ] && dbdir=$clashdir/ui && hostdir=":$db_port/ui"
#开机自启相关
if [ -f /etc/rc.common ];then
[ -n "$(find /etc/rc.d -name '*clash')" ] && autostart=enable_rc || autostart=disable_rc
else
[ -n "$(systemctl is-enabled clash.service 2>&1 | grep enable)" ] && autostart=enable_sys || autostart=disable_sys
fi
#开机自启描述
if [ "$start_old" = "已开启" ];then
auto="\033[33m已设置保守模式！\033[0m"
auto1="\033[36m设为\033[0m常规模式启动"
elif [ "$autostart" = "enable_rc" -o "$autostart" = "enable_sys" ]; then
auto="\033[32m已设置开机启动！\033[0m"
auto1="\033[36m禁用\033[0mclash开机启动"
else
auto="\033[31m未设置开机启动！\033[0m"
auto1="\033[36m允许\033[0mclash开机启动"
fi
#获取运行模式
if [ -z "$redir_mod" ];then
sed -i "2i\redir_mod=Redir模式" $ccfg
redir_mod=Redir模式
fi
#获取运行状态
PID=$(pidof clash)
if [ -n "$PID" ];then
run="\033[32m正在运行（$redir_mod）\033[0m"
VmRSS=`cat /proc/$PID/status|grep -w VmRSS|awk '{print $2,$3}'`
#获取运行时长
if [ -n "$start_time" ]; then
time=$((`date +%s`-start_time))
day=$((time/86400))
[ "$day" = "0" ] && day='' || day="$day天"
time=`date -u -d @${time} +%H小时%M分%S秒`
fi
else
run="\033[31m没有运行（$redir_mod）\033[0m"
#检测系统端口占用
checkport
fi
#检查定时任务配置文件
if [ -z "$cronpath" ];then
[ -d /etc/crontabs/ ] && cronpath="/etc/crontabs/root"
[ -d /var/spool/cron/ ] && cronpath="/var/spool/cron/root"
[ -d /var/spool/cron/crontabs/ ] && cronpath="/var/spool/cron/crontabs/root"
[ -d /etc/storage/cron/crontabs ] && cronpath="/etc/storage/cron/crontabs/admin"
[ -n "$cronpath" ] && sed -i "1i\cronpath=\'$cronpath\'" $ccfg
fi
#输出状态
echo -----------------------------------------------
echo -e "\033[30;46m欢迎使用ShellClash！\033[0m 版本：$versionsh_l"
echo -e "Clash服务"$run"，"$auto""
if [ -n "$PID" ];then
echo -e "当前内存占用：\033[44m"$VmRSS"\033[0m，已运行：\033[46;30m"$day"\033[44;37m"$time"\033[0m"
fi
echo -e "TG群：\033[36;4mhttps://t.me/clashfm\033[0m"
echo -----------------------------------------------
#检查新手引导
if [ -z "$userguide" ];then
read -p "检测到首次运行，是否启动新手引导？(1/0) > " res
echo -----------------------------------------------
sed -i "1i\userguide=1" $ccfg
[ "$res" = 1 ] && source $clashdir/getdate.sh && userguide
fi
}
echoerrornum(){
echo -----------------------------------------------
echo -e "\033[31m请输入正确的数字！\033[0m"
}
catpac(){
cat > /tmp/pac <<EOF
function FindProxyForURL(url, host) {
if (
isInNet(host, "0.0.0.0", "255.0.0.0")||
isInNet(host, "10.0.0.0", "255.0.0.0")||
isInNet(host, "127.0.0.0", "255.0.0.0")||
isInNet(host, "224.0.0.0", "224.0.0.0")||
isInNet(host, "240.0.0.0", "240.0.0.0")||
isInNet(host, "172.16.0.0", "255.240.0.0")||
isInNet(host, "192.168.0.0", "255.255.0.0")||
isInNet(host, "169.254.0.0", "255.255.0.0")
)
return "DIRECT";
else
return "PROXY $host:$mix_port; DIRECT;"
}
EOF
[ ! -d $clashdir/ui] && mkdir -p $clashdir/ui
[ "$(cat /tmp/pac)" != "$(cat $clashdir/ui/pac 2>&1)" ] && mv -f /tmp/pac $clashdir/ui/pac || rm -rf /tmp/pac
}
start_over(){
[ $? -eq 1 ] && exit
echo -e "\033[32mclash服务已启动！\033[0m"
if [ -n "$hostdir" ];then
echo -e "请使用\033[30;47m http://$host$hostdir \033[0m管理内置规则"
else
echo -e "可使用\033[30;47m http://clash.razord.top \033[0m管理内置规则"
echo -e "Host地址:\033[36m $host \033[0m 端口:\033[36m $db_port \033[0m"
echo -e "也可前往更新菜单安装本地Dashboard面板，连接更稳定！\033[0m"
fi
echo -----------------------------------------------
}
setport(){
inputport(){
read -p "请输入端口号(1000-65535) > " portx
if [ -z "$portx" ]; then
setport
elif [ $portx -gt 65535 -o $portx -le 999 ]; then
echo -e "\033[31m输入错误！请输入正确的数值(1000-65535)！\033[0m"
inputport
elif [ -n "$(echo $mix_port$redir_port$dns_port$db_port|grep $portx)" ]; then
echo -e "\033[31m输入错误！请不要输入重复的端口！\033[0m"
inputport
elif [ -n "$(netstat -ntul |grep :$portx)" ];then
echo -e "\033[31m当前端口已被其他进程占用，请重新输入！\033[0m"
inputport
else
sed -i "/$xport*/"d $ccfg
sed -i "1i$xport=$portx" $ccfg
echo -e "\033[32m设置成功！！！\033[0m"
setport
fi
}
source $ccfg
[ -z "$secret" ] && secret=未设置
[ -z "$authentication" ] && authentication=未设置
if [ -n "$(pidof clash)" ];then
echo -----------------------------------------------
echo -e "\033[33m检测到clash服务正在运行，需要先停止clash服务！\033[0m"
read -p "是否停止clash服务？(1/0) > " res
if [ "$res" = "1" ];then
$clashdir/start.sh stop
else
clashadv
fi
fi
echo -----------------------------------------------
echo -e " 1 修改Http/Sock5端口： \033[36m$mix_port\033[0m"
echo -e " 2 设置Http/Sock5密码： \033[36m$authentication\033[0m"
echo -e " 3 修改静态路由端口： \033[36m$redir_port\033[0m"
echo -e " 4 修改DNS监听端口： \033[36m$dns_port\033[0m"
echo -e " 5 修改面板访问端口： \033[36m$db_port\033[0m"
echo -e " 6 设置面板访问密码： \033[36m$secret\033[0m"
echo -e " 0 返回上级菜单"
read -p "请输入对应数字 > " num
if [ -z "$num" ]; then
echoerrornum
elif [ "$num" = 1 ]; then
xport=mix_port
inputport
elif [ "$num" = 2 ]; then
echo -----------------------------------------------
echo -e "格式必须是\033[32m 用户名:密码 \033[0m的形式，注意用小写冒号分隔！"
echo -e "请尽量不要使用特殊符号！可能会产生未知错误！"
echo "输入 0 删除密码"
echo -----------------------------------------------
read -p "请输入Http/Sock5用户名及密码 > " input
if [ "$input" = "0" ];then
authentication=""
sed -i "/authentication*/"d $ccfg
echo 密码已移除！
else
authentication=$(echo $input | grep :)
if [ -n "$authentication" ]; then
sed -i "/authentication*/"d $ccfg
sed -i "1i\authentication=\'$authentication\'" $ccfg
echo -e "\033[32m设置成功！！！\033[0m"
else
echo -e "\033[31m输入有误，请重新输入！\033[0m"
fi
fi
setport
elif [ "$num" = 3 ]; then
xport=redir_port
inputport
elif [ "$num" = 4 ]; then
xport=dns_port
inputport
elif [ "$num" = 5 ]; then
xport=db_port
inputport
elif [ "$num" = 6 ]; then
read -p "请输入面板访问密码(输入0删除密码) > " secret
if [ -n "$secret" ]; then
sed -i "/secret*/"d $ccfg
[ "$secret" = "0" ] && secret="" || sed -i "1i\secret=$secret" $ccfg
echo -e "\033[32m设置成功！！！\033[0m"
fi
setport
fi
}
setdns(){
source $ccfg
if [ "$dns_no" = "true" ];then
read -p "检测到内置DNS已被禁用，是否启用内置DNS？(1/0) > " res
if [ "$res" = "1" ];then
sed -i "/dns_no*/"d $ccfg
else
clashadv
fi
fi
[ -z "$dns_nameserver" ] && dns_nameserver='114.114.114.114, 223.5.5.5'
[ -z "$dns_fallback" ] && dns_fallback='1.0.0.1, 8.8.4.4'
echo -----------------------------------------------
echo -e "当前基础DNS：\033[36m$dns_nameserver\033[0m"
echo -e "fallbackDNS：\033[36m$dns_fallback\033[0m"
echo -e "多个DNS地址请用\033[30;47m | \033[0m分隔一次性输入"
echo -e "\033[33m使用redir-host时，fallback组暂不支持tls或者https形式的DNS\033[0m"
echo -----------------------------------------------
echo -e " 1 修改基础DNS"
echo -e " 2 修改fallback_DNS"
echo -e " 3 重置DNS配置"
echo -e " 4 禁用内置DNS(慎用)"
echo -e " 0 返回上级菜单"
echo -----------------------------------------------
read -p "请输入对应数字 > " num
if [ -z "$num" ]; then
echoerrornum
clashadv
elif [ "$num" = 1 ]; then
read -p "请输入新的DNS > " dns_nameserver
dns_nameserver=$(echo $dns_nameserver | sed 's/|/\,\ /')
if [ -n "$dns_nameserver" ]; then
sed -i "/dns_nameserver*/"d $ccfg
sed -i "1i\dns_nameserver=\'$dns_nameserver\'" $ccfg
echo -e "\033[32m设置成功！！！\033[0m"
fi
elif [ "$num" = 2 ]; then
read -p "请输入新的DNS > " dns_fallback
dns_fallback=$(echo $dns_nameserver | sed 's/|/\,\ /')
if [ -n "$dns_fallback" ]; then
sed -i "/dns_fallback*/"d $ccfg
sed -i "1i\dns_fallback=\'$dns_fallback\'" $ccfg
echo -e "\033[32m设置成功！！！\033[0m"
fi
elif [ "$num" = 3 ]; then
dns_nameserver=""
dns_fallback=""
sed -i "/dns_nameserver*/"d $ccfg
sed -i "/dns_fallback*/"d $ccfg
echo -e "\033[33mDNS配置已重置！！！\033[0m"
elif [ "$num" = 4 ]; then
echo -----------------------------------------------
echo -e "\033[31m仅限搭配其他DNS服务(比如dnsmasq、smartDNS)时使用！\033[0m"
sed -i "/dns_no*/"d $ccfg
sed -i "1i\dns_no=true" $ccfg
echo -e "\033[33m已禁用内置DNS！！！\033[0m"
clashadv
else
clashadv
fi
setdns
}
checkport(){
for portx in $dns_port $mix_port $redir_port $db_port ;do
if [ -n "$(netstat -ntul 2>&1 |grep :$portx)" ];then
echo -----------------------------------------------
echo -e "检测到端口【$portx】被以下进程占用！clash可能无法正常启动！\033[33m"
echo $(netstat -ntulp | grep :$portx | head -n 1)
echo -e "\033[0m-----------------------------------------------"
echo -e "\033[36m请修改默认端口配置！\033[0m"
setport
source $ccfg
checkport
fi
done
}
clashstart(){
#检查clash核心
if [ ! -f $clashdir/clash ];then
echo -----------------------------------------------
echo -e "\033[31m没有找到核心文件，请先下载clash核心！\033[0m"
source $clashdir/getdate.sh && checkupdate && getcore
fi
#检查GeoIP数据库
if [ ! -f $clashdir/Country.mmdb ];then
echo -----------------------------------------------
echo -e "\033[31m没有找到GeoIP数据库文件，请下载数据库文件！\033[0m"
source $clashdir/getdate.sh && checkupdate && getgeo
fi
#检查yaml配置文件
if [ ! -f "$yaml" ];then
echo -----------------------------------------------
echo -e "\033[31m没有找到配置文件，请先导入配置文件！\033[0m"
clashlink
fi
if [ -n "$PID" ];then
echo -----------------------------------------------
$clashdir/start.sh stop
echo -e "\033[31mClash服务已停止！\033[0m"
fi
echo -----------------------------------------------
$clashdir/start.sh start
sleep 1
PID=$(pidof clash)
if [ -z "$PID" ];then
$clashdir/start.sh stop
echo -e "\033[31mclash启动失败！\033[0m"
exit;
fi
catpac #生成pac自动代理文件
start_over
}
macfilter(){
add_mac(){
echo -----------------------------------------------
echo -e "\033[33m序号 设备IP 设备mac地址 设备名称\033[32m"
cat $dhcpdir | awk '{print " "NR" "$3,$2,$4}'
echo -e "\033[0m 0-----------------------------------------------"
echo -e " 0 或回车 结束添加"
read -p "请输入需要添加的设备的对应序号 > " num
if [ -z "$num" ]||[ "$num" -le 0 ]; then
macfilter
elif [ $num -le $(cat $dhcpdir | awk 'END{print NR}') ]; then
macadd=$(cat $dhcpdir | awk '{print $2}' | sed -n "$num"p)
if [ -z "$(cat $clashdir/mac | grep -E "$macadd")" ];then
echo $macadd >> $clashdir/mac
echo -----------------------------------------------
echo 已添加的mac地址：
cat $clashdir/mac
else
echo -----------------------------------------------
echo -e "\033[31m已添加的设备，请勿重复添加！\033[0m"
fi
else
echo -----------------------------------------------
echo -e "\033[31m输入有误，请重新输入！\033[0m"
fi
add_mac
}
del_mac(){
echo -----------------------------------------------
if [ -z "$(cat $clashdir/mac)" ];then
echo -e "\033[31m列表中没有需要移除的设备！\033[0m"
macfilter
fi
echo -e "\033[33m序号 设备IP 设备mac地址 设备名称\033[0m"
i=1
for mac in $(cat $clashdir/mac); do
echo -e " $i \033[32m$(cat $dhcpdir | awk '{print $3,$2,$4}' | grep $mac)\033[0m"
i=$((i+1))
done
echo -----------------------------------------------
echo -e "\033[0m 0 或回车 结束删除"
read -p "请输入需要移除的设备的对应序号 > " num
if [ -z "$num" ]||[ "$num" -le 0 ]; then
macfilter
elif [ $num -le $(cat $clashdir/mac | wc -l) ];then
sed -i "${num}d" $clashdir/mac
echo -----------------------------------------------
echo -e "\033[32m对应设备已移除！\033[0m"
else
echo -----------------------------------------------
echo -e "\033[31m输入有误，请重新输入！\033[0m"
fi
del_mac
}
echo -----------------------------------------------
[ -f /var/lib/dhcp/dhcpd.leases ] && dhcpdir='/var/lib/dhcp/dhcpd.leases'
[ -f /var/lib/dhcpd/dhcpd.leases ] && dhcpdir='/var/lib/dhcpd/dhcpd.leases'
[ -f /tmp/dhcp.leases ] && dhcpdir='/tmp/dhcp.leases'
######
echo -e "\033[30;47m请在此添加或移除设备\033[0m"
if [ -n "$(cat $clashdir/mac)" ]; then
echo -----------------------------------------------
echo -e "当前已过滤设备为：\033[36m"
echo -e "\033[33m 设备IP 设备mac地址 设备名称\033[0m"
for mac in $(cat $clashdir/mac); do
cat $dhcpdir | awk '{print $3,$2,$4}' | grep $mac
done
echo -----------------------------------------------
fi
echo -e " 1 \033[31m清空整个列表\033[0m"
echo -e " 2 \033[32m添加指定设备\033[0m"
echo -e " 3 \033[33m移除指定设备\033[0m"
echo -e " 4 \033[32m添加全部设备\033[0m(请搭配移除指定设备使用)"
echo -e " 0 返回上级菜单"
read -p "请输入对应数字 > " num
if [ -z "$num" ]; then
echoerrornum
clashcfg
elif [ "$num" = 0 ]; then
clashcfg
elif [ "$num" = 1 ]; then
:>$clashdir/mac
echo -----------------------------------------------
echo -e "\033[31m设备列表已清空！\033[0m"
macfilter
elif [ "$num" = 2 ]; then
add_mac
elif [ "$num" = 3 ]; then
del_mac
elif [ "$num" = 4 ]; then
echo -----------------------------------------------
cat $dhcpdir | awk '{print $2}' > $clashdir/mac
echo -e "\033[32m已经将所有设备全部添加进过滤列表！\033[0m"
echo -e "\033[33m请搭配【移除指定设备】功能使用！\033[0m"
sleep 1
macfilter
else
echoerrornum
macfilter
fi
}
clashcfg(){
set_redir_mod(){
echo -----------------------------------------------
echo -e "当前代理模式为：\033[47;30m $redir_mod \033[0m；Clash核心为：\033[47;30m $clashcore \033[0m"
echo -e "\033[33m切换模式后需要手动重启clash服务以生效！\033[0m"
echo -e "\033[36mTun及混合模式必须使用clashpre核心！\033[0m"
echo -----------------------------------------------
echo " 1 Redir模式：CPU以及内存占用较低"
echo " 但不支持UDP流量转发"
echo " 适合非游戏用户使用"
echo " 2 Tun模式： 支持UDP转发且延迟最低"
echo " CPU占用极高，只支持fake-ip模式"
echo " 适合游戏用户、非大流量用户"
echo " 3 混合模式： 使用redir转发TCP，Tun转发UPD"
echo " 速度较快，内存占用略高"
echo " 适合游戏用户、综合用户"
echo " 4 纯净模式： 不设置iptables静态路由"
echo " 必须手动配置http/sock5代理"
echo " 或使用内置的PAC文件配置代理"
echo " 0 返回上级菜单"
read -p "请输入对应数字 > " num
if [ -z "$num" ]; then
echoerrornum
clashcfg
elif [ "$num" = 0 ]; then
clashcfg
elif [ "$num" = 1 ]; then
redir_mod=Redir模式
elif [ "$num" = 2 ]; then
if [ "$clashcore" = "clash" ] || [ "$clashcore" = "clashr" ];then
echo -----------------------------------------------
echo -e "\033[31m当前核心不支持开启Tun模式！请先切换clash核心！！！\033[0m"
clashcfg
fi
redir_mod=Tun模式
dns_mod=fake-ip
elif [ "$num" = 3 ]; then
if [ "$clashcore" = "clash" ] || [ "$clashcore" = "clashr" ];then
echo -----------------------------------------------
echo -e "\033[31m当前核心不支持开启Tun模式！请先切换clash核心！！！\033[0m"
clashcfg
fi
redir_mod=混合模式
elif [ "$num" = 4 ]; then
redir_mod=纯净模式
echo -----------------------------------------------
echo -e "\033[32m已经设置为纯净模式！\033[0m"
echo -e "\033[33m当前模式必须手动在设备WiFi或应用中配置HTTP或sock5代理\033[0m"
echo -e "HTTP/SOCK5代理服务器地址：\033[30;47m$host\033[0m;端口均为：\033[30;47m$mix_port\033[0m"
echo -e "\033[31m也可以使用PAC自动代理文件，具体使用方法请自行搜索\033[0m"
echo -----------------------------------------------
read -p "是否配置自动代理PAC文件(1/0) > " res
if [ "$res" = 1 ]; then
source $clashdir/getdate.sh && setpac
fi
else
echoerrornum
clashcfg
fi
sed -i '/redir_mod*/'d $ccfg
sed -i "1i\redir_mod=$redir_mod" $ccfg
sed -i '/dns_mod*/'d $ccfg
sed -i "1i\dns_mod=$dns_mod" $ccfg
echo -----------------------------------------------
echo -e "\033[36m已设为 $redir_mod ！！\033[0m"
}
set_dns_mod(){
echo -----------------------------------------------
echo -e "当前DNS运行模式为：\033[47;30m $dns_mod \033[0m"
echo -e "\033[33m切换模式后需要手动重启clash服务以生效！\033[0m"
echo -----------------------------------------------
echo " 1 fake-ip模式： 响应速度更快"
echo " 可能与某些局域网设备有冲突"
echo " 2 redir_host模式：兼容性更好"
echo " 不支持Tun模式，可能存在DNS污染"
echo " 0 返回上级菜单"
read -p "请输入对应数字 > " num
if [ -z "$num" ]; then
echoerrornum
clashcfg
elif [ "$num" = 0 ]; then
clashcfg
elif [ "$num" = 1 ]; then
dns_mod=fake-ip
elif [ "$num" = 2 ]; then
dns_mod=redir_host
redir_mod=Redir模式
else
echoerrornum
clashcfg
fi
sed -i '/dns_mod*/'d $ccfg
sed -i "1i\dns_mod=$dns_mod" $ccfg
sed -i '/redir_mod*/'d $ccfg
sed -i "1i\redir_mod=$redir_mod" $ccfg
echo -----------------------------------------------
echo -e "\033[36m已设为 $dns_mod 模式！！\033[0m"
}
#获取设置默认显示
[ -z "$skip_cert" ] && skip_cert=已开启
[ -z "$common_ports" ] && common_ports=已开启
[ -z "$dns_mod" ] && dns_mod=redir_host
[ -z "$dns_over" ] && dns_over=已开启
[ -z "$local_proxy" ] && local_proxy=未开启
[ -z "$(cat $clashdir/mac)" ] && mac_return=未开启 || mac_return=已启用
#
echo -----------------------------------------------
echo -e "\033[30;47m欢迎使用功能设置菜单：\033[0m"
echo -e "\033[32m修改配置后请手动重启clash服务！\033[0m"
echo -----------------------------------------------
echo -e " 1 切换Clash运行模式: \033[36m$redir_mod\033[0m"
echo -e " 2 切换DNS运行模式： \033[36m$dns_mod\033[0m"
echo -e " 3 跳过本地证书验证： \033[36m$skip_cert\033[0m ————解决节点证书验证错误"
echo -e " 4 只代理常用端口： \033[36m$common_ports\033[0m ————用于屏蔽P2P流量"
echo -e " 5 过滤局域网mac地址： \033[36m$mac_return\033[0m ————列表内设备不走代理"
echo -e " 6 不使用本地DNS服务： \033[36m$dns_over\033[0m ————防止redir-host模式的dns污染"
echo -e " 7 设置代理本机流量: \033[36m$local_proxy\033[0m ————使用环境变量或者PAC配置本机代理"
echo -----------------------------------------------
echo -e " 9 \033[32m重启\033[0mclash服务"
echo -e " 0 返回上级菜单 \033[0m"
echo -----------------------------------------------
read -p "请输入对应数字 > " num
if [ -z "$num" ]; then
echoerrornum
clashsh
elif [ "$num" = 0 ]; then
clashsh
elif [ "$num" = 1 ]; then
set_redir_mod
clashcfg
elif [ "$num" = 2 ]; then
set_dns_mod
clashcfg
elif [ "$num" = 3 ]; then
sed -i '/skip_cert*/'d $ccfg
echo -----------------------------------------------
if [ "$skip_cert" = "未开启" ] > /dev/null 2>&1; then
sed -i "1i\skip_cert=已开启" $ccfg
echo -e "\033[33m已设为开启跳过本地证书验证！！\033[0m"
skip_cert=已开启
else
sed -i "1i\skip_cert=未开启" $ccfg
echo -e "\033[33m已设为禁止跳过本地证书验证！！\033[0m"
skip_cert=未开启
fi
clashcfg
elif [ "$num" = 4 ]; then
sed -i '/common_ports*/'d $ccfg
echo -----------------------------------------------
if [ "$common_ports" = "未开启" ] > /dev/null 2>&1; then
sed -i "1i\common_ports=已开启" $ccfg
echo -e "\033[33m已设为仅代理（22,53,587,465,995,993,143,80,443）等常用端口！！\033[0m"
common_ports=已开启
else
sed -i "1i\common_ports=未开启" $ccfg
echo -e "\033[33m已设为代理全部端口！！\033[0m"
common_ports=未开启
fi
clashcfg
elif [ "$num" = 5 ]; then
macfilter
elif [ "$num" = 6 ]; then
sed -i '/dns_over*/'d $ccfg
echo -----------------------------------------------
if [ "$dns_over" = "未开启" ] > /dev/null 2>&1; then
sed -i "1i\dns_over=已开启" $ccfg
echo -e "\033[33m已设置DNS为不走本地dnsmasq服务器！\033[0m"
echo -e "可能会对浏览速度产生一定影响，介意勿用！"
dns_over=已开启
else
/etc/init.d/clash enable
sed -i "1i\dns_over=未开启" $ccfg
echo -e "\033[32m已设置DNS通过本地dnsmasq服务器！\033[0m"
echo -e "redir-host模式下部分网站可能会被运营商dns污染导致无法打开"
dns_over=未开启
fi
clashcfg
elif [ "$num" = 7 ]; then
sed -i '/local_proxy*/'d $ccfg
echo -----------------------------------------------
if [ "$local_proxy" = "未开启" ] > /dev/null 2>&1; then
sed -i "1i\local_proxy=已开启" $ccfg
local_proxy=已开启
catpac #生成pac自动代理文件
$clashdir/start.sh set_proxy $mix_port
echo -e "\033[32m已经成功配置本机代理~\033[0m"
echo -e "\033[36m如未生效，请重新启动终端或重新连接SSH！\033[0m"
else
sed -i "1i\local_proxy=未开启" $ccfg
local_proxy=未开启
$clashdir/start.sh unset_proxy
echo -e "\033[33m已经停用本机代理规则！！\033[0m"
echo -e "\033[36m如未生效，请重新启动终端或重新连接SSH！\033[0m"
fi
sleep 1
clashcfg
elif [ "$num" = 9 ]; then
clashstart
clashsh
else
echoerrornum
clashsh
fi
}
clashadv(){
#获取设置默认显示
[ -z "$modify_yaml" ] && modify_yaml=未开启
[ -z "$ipv6_support" ] && ipv6_support=未开启
[ -z "$start_old" ] && start_old=未开启
[ -z "$tproxy_mod" ] && tproxy_mod=未开启
#
echo -----------------------------------------------
echo -e "\033[30;47m欢迎使用进阶模式菜单：\033[0m"
echo -e "\033[33m如您不是很了解clash的运行机制，请勿更改！\033[0m"
echo -e "\033[32m修改配置后请手动重启clash服务！\033[0m"
echo -----------------------------------------------
echo -e " 1 使用自定义配置: \033[36m$modify_yaml\033[0m ————不使用内置规则修饰config.yaml"
echo -e " 2 启用ipv6支持: \033[36m$ipv6_support\033[0m ————实验性功能，可能不稳定"
echo -e " 3 使用保守方式启动: \033[36m$start_old\033[0m ————切换时会停止clash服务"
echo -e " 4 Redir模式udp转发: \033[36m$tproxy_mod\033[0m ————依赖iptables-mod-tproxy"
echo -e " 5 手动指定clash运行端口及秘钥"
echo -e " 6 手动配置内置DNS服务"
echo -----------------------------------------------
echo -e " 8 \033[31m重置\033[0m配置文件"
echo -e " 9 \033[32m重启\033[0mclash服务"
echo -e " 0 返回上级菜单 \033[0m"
echo -----------------------------------------------
read -p "请输入对应数字 > " num
if [ -z "$num" ]; then
echoerrornum
clashsh
elif [ "$num" = 0 ]; then
clashsh
elif [ "$num" = 1 ]; then
sed -i '/modify_yaml*/'d $ccfg
echo -----------------------------------------------
if [ "$modify_yaml" = "未开启" ] > /dev/null 2>&1; then
sed -i "1i\modify_yaml=已开启" $ccfg
echo -e "\033[33m已设为使用用户完全自定义的配置文件！！"
echo -e "\033[36m不明白原理的用户切勿随意开启此选项"
echo -e "\033[31m！！！必然会导致上不了网！！!\033[0m"
modify_yaml=已开启
sleep 3
else
sed -i "1i\modify_yaml=未开启" $ccfg
echo -e "\033[32m已设为使用脚本内置规则管理config.yaml配置文件！！\033[0m"
modify_yaml=未开启
fi
clashadv
elif [ "$num" = 2 ]; then
sed -i '/ipv6_support*/'d $ccfg
echo -----------------------------------------------
if [ "$ipv6_support" = "未开启" ] > /dev/null 2>&1; then
sed -i "1i\ipv6_support=已开启" $ccfg
echo -e "\033[33m已开启对ipv6协议的支持！！\033[0m"
echo -e "Clash对ipv6的支持并不友好，如不能使用请静等修复！"
ipv6_support=已开启
sleep 2
else
sed -i "1i\ipv6_support=未开启" $ccfg
echo -e "\033[32m已禁用对ipv6协议的支持！！\033[0m"
ipv6_support=未开启
fi
clashadv
elif [ "$num" = 3 ]; then
sed -i '/start_old*/'d $ccfg
echo -----------------------------------------------
if [ "$start_old" = "未开启" ] > /dev/null 2>&1; then
sed -i "1i\start_old=已开启" $ccfg
echo -e "\033[33m改为使用保守方式启动clash服务！！\033[0m"
echo -e "\033[36m此模式兼容性更好但无法禁用开机启动！！\033[0m"
start_old=已开启
$clashdir/start.sh stop
sleep 2
else
sed -i "1i\start_old=未开启" $ccfg
echo -e "\033[32m改为使用默认方式启动clash服务！！\033[0m"
start_old=未开启
$clashdir/start.sh stop
fi
clashadv
elif [ "$num" = 4 ]; then
sed -i '/tproxy_mod*/'d $ccfg
echo -----------------------------------------------
if [ "$tproxy_mod" = "未开启" ]; then
if [ -n "$(iptables -j TPROXY 2>&1 | grep 'on-port')" ];then
sed -i "1i\tproxy_mod=已开启" $ccfg
tproxy_mod=已开启
echo -e "\033[32m已经为Redir模式启用udp转发功能！\033[0m"
else
echo -e "\033[31m您的设备不支持tproxy模式，无法开启！\033[0m"
fi
else
sed -i "1i\tproxy_mod=未开启" $ccfg
tproxy_mod=未开启
echo -e "\033[33m已经停止使用tproxy转发udp流量！！\033[0m"
fi
sleep 1
clashadv
elif [ "$num" = 5 ]; then
setport
clashadv
elif [ "$num" = 6 ]; then
setdns
clashadv
elif [ "$num" = 8 ]; then
read -p "确认重置配置文件？(1/0) > " res
if [ "$res" = "1" ];then
echo "versionsh_l=$versionsh_l" > $ccfg
echo "start_time=$start_time" >> $ccfg
echo "#标识clash运行状态的文件，不明勿动！" >> $ccfg
echo -e "\033[33m配置文件已重置，请重新运行脚本！\033[0m"
exit
fi
clashadv
elif [ "$num" = 9 ]; then
clashstart
sleep 1
clashsh
else
echoerrornum
clashsh
fi
}
clashcron(){
setcron(){
echo -----------------------------------------------
echo -e " 正在设置：\033[32m$cronname\033[0m定时任务"
echo -e " 输入 1-7 对应\033[33m每周相应天\033[0m运行"
echo -e " 输入 8 设为\033[33m每天定时\033[0m运行"
echo -e " 输入 1,3,6 代表\033[36m每周1,3,6\033[0m运行(注意用小写逗号分隔)"
echo -----------------------------------------------
echo -e " 输入 9 \033[31m删除定时任务\033[0m"
echo -e " 输入 0 返回上级菜单"
echo -----------------------------------------------
read -p "请输入对应数字 > " num
if [ -z "$num" ]; then
echoerrornum
clashcron
elif [ "$num" = 0 ]; then
clashcron
elif [ "$num" = 9 ]; then
sed -i /$cronname/d $cronpath
echo -----------------------------------------------
echo -e "\033[31m定时任务：$cronname已删除！\033[0m"
clashcron
elif [ "$num" = 8 ]; then
week='*'
week1=每天
echo 已设为每天定时运行！
else
week=$num
week1=每周$week
echo 已设为每周 $num 运行！
fi
#设置具体时间
echo -----------------------------------------------
read -p "请输入小时（0-23） > " num
if [ -z "$num" ]; then
echoerrornum
setcron
elif [ $num -gt 23 ] || [ $num -lt 0 ]; then
echoerrornum
setcron
else
hour=$num
fi
echo -----------------------------------------------
read -p "请输入分钟（0-60） > " num
if [ -z "$num" ]; then
echoerrornum
setcron
elif [ $num -gt 60 ] || [ $num -lt 0 ]; then
echoerrornum
setcron
else
min=$num
fi
echo -----------------------------------------------
echo 将在$week1的$hour点$min分$cronname（旧的任务会被覆盖）
read -p "是否确认添加定时任务？(1/0) > " res
if [ "$res" = '1' ]; then
sed -i /$cronname/d $cronpath
echo "$min $hour * * $week $cronset >/dev/null 2>&1 #$week1的$hour点$min分$cronname" >> $cronpath
echo -----------------------------------------------
echo -e "\033[31m定时任务已添加！！！\033[0m"
chmod 600 $cronpath #修改权限
fi
clashcron
}
checkcron(){
if [ -z "$cronpath" ];then
echo -----------------------------------------------
echo -e "\033[33m找不到定时任务配置文件，无法添加添加定时任务！"
echo -e "\033[0m请手动指定定时任务配置文件，文件位置可以通过【crontab -e】命令查看\033[0m"
echo -----------------------------------------------
read -p "请输入crontab文件路径(输入回车返回主菜单) > " path
if [ -z "$path" ];then
clashsh
elif [ -f $path ];then
cronpath=$path
sed -i '/cronpath*/'d $ccfg
sed -i "1i\cronpath=\'$cronpath\'" $ccfg
else
echo -e "\033[33m输入的路径不正确，请重新输入！\033[0m"
checkcron
fi
fi
}
#定时任务菜单
checkcron #检测定时任务文件
echo -----------------------------------------------
echo -e "\033[30;47m欢迎使用定时任务功能：\033[0m"
echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
echo -----------------------------------------------
echo -e "\033[33m已添加的定时任务：\033[36m"
cat $cronpath | grep -oE ' #.*'
echo -e "\033[0m"-----------------------------------------------
echo -e " 1 设置\033[33m定时重启\033[0mclash服务"
echo -e " 2 设置\033[31m定时停止\033[0mclash服务"
echo -e " 3 设置\033[32m定时开启\033[0mclash服务"
echo -e " 4 设置\033[33m定时更新\033[0m订阅并重启服务"
echo -----------------------------------------------
echo -e " 0 返回上级菜单"
read -p "请输入对应数字 > " num
if [ -z "$num" ]; then
echoerrornum
clashsh
elif [ "$num" = 0 ]; then
clashsh
elif [ "$num" = 1 ]; then
cronname=重启clash服务
cronset="$clashdir/start.sh restart"
setcron
elif [ "$num" = 2 ]; then
cronname=停止clash服务
cronset="$clashdir/start.sh stop"
setcron
elif [ "$num" = 3 ]; then
cronname=开启clash服务
cronset="$clashdir/start.sh start"
setcron
elif [ "$num" = 4 ]; then
cronname=更新订阅链接
cronset="$clashdir/start.sh getyaml"
setcron
else
echoerrornum
clashsh
fi
}
clashsh(){
#############################
getconfig
#############################
echo -e " 1 \033[32m启动/重启\033[0mclash服务"
echo -e " 2 clash\033[33m功能设置\033[0m"
echo -e " 3 \033[31m停止\033[0mclash服务"
echo -e " 4 $auto1"
echo -e " 5 设置\033[33m定时任务\033[0m$cronoff"
echo -e " 6 导入\033[32m配置文件\033[0m"
echo -e " 7 clash\033[31m进阶设置\033[0m"
echo -e " 8 \033[35m测试菜单\033[0m"
echo -e " 9 \033[36m更新/卸载\033[0m"
echo -----------------------------------------------
echo -e " 0 \033[0m退出脚本\033[0m"
read -p "请输入对应数字 > " num
if [ -z "$num" ];then
echoerrornum
exit;
elif [ "$num" = 0 ]; then
exit;
elif [ "$num" = 1 ]; then
clashstart
sleep 1
clashsh
elif [ "$num" = 2 ]; then
clashcfg
elif [ "$num" = 3 ]; then
$clashdir/start.sh stop
echo -----------------------------------------------
echo -e "\033[31mClash服务已停止！\033[0m"
echo -----------------------------------------------
exit;
elif [ "$num" = 4 ]; then
echo -----------------------------------------------
if [ "$start_old" = "已开启" ];then
sed -i "/start_old*/d" $ccfg
sed -i "1i\start_old=未开启" $ccfg
echo -e "\033[32m已设为使用默认方式启动clash服务！！\033[0m"
start_old=未开启
elif [ "$autostart" = "enable_rc" ]; then
/etc/init.d/clash disable
echo -e "\033[33m已禁止Clash开机启动！\033[0m"
elif [ "$autostart" = "disable_rc" ]; then
/etc/init.d/clash enable
echo -e "\033[32m已设置Clash开机启动！\033[0m"
elif [ "$autostart" = "enable_sys" ]; then
systemctl disable clash.service > /dev/null 2>&1
echo -e "\033[33m已禁止Clash开机启动！\033[0m"
elif [ "$autostart" = "disable_sys" ]; then
systemctl enable clash.service > /dev/null 2>&1
echo -e "\033[32m已设置Clash开机启动！\033[0m"
else
echo -e "\033[32m当前系统不支持设置开启启动！\033[0m"
fi
clashsh
elif [ "$num" = 5 ]; then
clashcron
elif [ "$num" = 6 ]; then
source $clashdir/getdate.sh && clashlink
elif [ "$num" = 7 ]; then
clashadv
elif [ "$num" = 8 ]; then
source $clashdir/getdate.sh && testcommand
elif [ "$num" = 9 ]; then
source $clashdir/getdate.sh && update
else
echoerrornum
exit;
fi
}
[ -z "$1" ] && clashsh
case "$1" in
-h)
echo -----------------------------------------
echo "欢迎使用ShellClash"
echo -----------------------------------------
echo " -t 测试模式"
echo " -h 帮助列表"
echo -----------------------------------------
echo "在线求助：t.me/clashfm"
echo "官方博客：juewuy.github.io"
echo "发布页面：github.com/juewuy/ShellClash"
echo -----------------------------------------
;;
-t)
shtype=sh && [ -n "$(ls -l /bin/sh|grep -o dash)" ] && shtype=bash
$shtype -x $clashdir/clash.sh
;;
esac
Reference in New Issue View Git Blame Copy Permalink